Operation Verification

Do an overall visual inspection of the bike looking for any loose hardware and/or missing parts Repair and replace as needed.

Verify that the bike sets level and is stable on the floor, see Leveling Adjustment Procedure.

Verify that the seat height and forward/back adjustment operate correctly.

• Make sure that the seat post up/down movement is smooth and that the pop-pins lock at different positions. .
• Make sure the forward/back slider movement is smooth and the adjustment knob locks the seat in position.

Verify that the handlebar height and forward/back adjustment work correctly.

• Make sure the handlebar post up/down movement is smooth and that the pop-pins lock at different positions.
• Make sure the forward/back slider movement is smooth and the adjustment knob locks the handlebar in position.

Set the resistance to minimum and pedal the bike at a moderate pace (55 rpm or greater), increase the resistance to maximum and return to zero resistance.

• Verify that the resistance knob functions normally from min to max resistance.
• Verify that there were no unusual noises from the brake pads or flywheel during operation.
• Verify that at maximum resistance, the bike was very hard to pedal.

Commercial use: Release all tension from the resistance knob when the operational check is completed.